Fish Processing Plant

Fish Processing Plant

STRUCTURAL ENGINEERING
Columbia Colstor, INC.

Woodland, Washington

SUMMARY

Crow Engineering served as the prime consultant for engineering and design for a new 30,000 square foot steel-framed fish processing plant with -55 F deg. freezing cells.

Additional Cold Storage & Distribution Projects

Reach out to Crow Engineering


4th St Bridge Trolley

4th St Bridge Trolley

STRUCTURAL ENGINEERING
4th St. Trolley Bridge

San Franscisco, California

Structural Engineer: John F. Bradford, PE, SE

CONTACT JOHN
SUMMARY

Crow Engineering was selected as a sub-consultant by Elcon Associates, Inc. to provide structural engineering and design for the support frames and cable supports on the Trolley. This project is unique as the trolley crosses the 4th Street bascule bridge.

Additional industrial engineering projects

Reach out to Crow Engineering


California Redwood Company

California Redwood Company

STRUCTURAL ENGINEERING
california redwood CO.

Samoa, California

STRUCTURAL ENGINEER: John F. Bradford, PE, SE

SUMMARY

Crow Engineering, Inc. was contracted to perform a structural assessment of the California Redwood Company chip loading facility adjacent to the Evergreen Pulp Mill in Samoa, California.

The dock structure consists of the combination of a timber pile finger dock which extends approximately 700 feet over the water, a timber pile supported central platform, and a steel pipe pile supported concrete deck and pile caps which support the main town structure.

The conveyor is supported on four timber bents utilizing full height timber piles and four steel bents that are supported by concrete pile caps on steel pipe piles. Additionally, a series of steel pipe pile dolphins with concrete caps, connected by a timber walkway extend both directions from the main dock structure, including one timber dolphin on the south extension.

Additional Industrial & Wood Product Engineering Projects

Reach out to Crow Engineering


Aspen Sundeck

Aspen Sundeck

STRUCTURAL ENGINEERING, HEAVY TIMBER & CONSULTING SERVICES
ASPEN SUNDECK

Aspen, CO

ENGINEER: John Bradford, PE SE

PARTNERS/VENDORS: Shaw Construction, CCY Architects, Monroe & Newell

VISIT SUNDECK WEBSITE
SUMMARY

Structural Wood Products hired Crow Engineering to provide structural engineering design for a custom heavy-timber roof framing system including a complicated truss system. The 21,000 square foot facility is located at the top of Aspen Mountain and includes restaurant, club, and skier amenities.

services
  • Complicated heavy timber truss system
  • Architecturally and aesthetically pleasing design
  • Coordination with architects on specialty connection types
Additional commercial & heavy/mass timber projects

Reach out to Crow Engineering


TWA Flight 800 Memorial

TWA Flight 800 Memorial

MASS/HEAVY TIMBER ENGINEERING
TWA FLIGHT 800 MEMORIAL

Smith Point Beach, NY

ENGINEER: John Bradford, PE SE

VISIT MEMORIAL WEBSITE
SUMMARY

Structural Wood Products hired Crow Engineering to provide structural engineering design for a custom heavy-timber trellis roof system. Our designers and drafters provided detailed shop drawings for the fabrication of the wood members and connections.

SERVICES
  • Custom heavy timber design and detailing
  • Shop detailing
Additional COMMERCIAL & MASS/HEAVY TIMBER PROJECTS
Schedule a Meeting with Crow Engineering

Skip to content